Papyrus Inc. - Solving paper quality and design problems related to headbox,press and dryer sections,refining and stock preperation in the paper industry.

PROFESSIONAL PUBLICATIONS

BOOKS:

1- Paper Quality - New Trends and Specifications
2- Newsprint Manufacture- Published through AccuRay Corp.
3- Tissue Manufacture- Published through AccuRay Corp.
4- Encyclopedia of Papermaking (written but has never been published)

ARTICLES AND PROFESSIONAL PRESENTATIONS:

1- Improving Quality and Process Efficiency at Minimal Cost Using
Scientific Principles, Presented at 1999 TAPPI Engineering/Process
& Product Quality Conference, Anaheim, California (Coauthor: Yaser A. Ibrahim).

2- A Practical Look At How To Improve Sheet Formation In the Headbox/Approach Piping Systems, Presented at 1997 TAPPI Papermakers/Engineering Superconference, Nashville, Tennessee (Coauthor: Yaser A. Ibrahim).

3- Ideal Settings of Headbox Process Variables/From the Open Type to Gap Formers, Presented at NEW ENGLAND TAPPI CONNECTICUT VALLEY PIMA ANNUAL TECHNICAL SEMINAR, March 09, 1994.

4- New Slice Cleaner "Powerflosser" Eliminates Streaks Caused by Deposits, Presented at TAPPI 1992 Supplier Showcase, March 3, 1992,Georgia World Gongress Center Atlanta, Georgia

5- The Interference of Stock Contaminants in the Headbox/Approach Piping System, Presented at 1989 TAPPI CONTAMINANT PROBLEMS AND STRATEGIES IN WASTEPAPER RECYCLING SEMINAR, Madison, Wisconsin.

6- Headbox/Approach Piping-Design and Operation Criteria, Presented at TAPPI VIRGINIA-CAROLINA SECTION winter Meeting, November 18-19, 1988.

7- How Headbox Design and Operating Criteria Affect Machine Performance and Sheet Structure, PULP & PAPER CANADA 88: 12 (1987) and PIMA/January 1988.

8- The Interaction of the Headbox Design and Operating Criteria on Machine Performance and the Sheet Structure, Presented at the Institute of Paper Chemistry, Appleton, Wisconsin, October 30, 1987 and at the International Tissue Conference, Columbus,
Mississippi, November 11, 1987.

9- Computerized Control of the Jet/Wire Speed Ratio, Presented at the Annual Meeting of LAKE STATES TAPPI, October 29, 1987.

10- The Dilemma of Designing and Operating the Forming Board for the Sheet Forming Process, PIMA, November, 1986.

11- Designing and Operating the Forming Board for Better Sheet Forming, PULP & PAPER CANADA 87:10 (1986).

12- Compressive Resistance, Strength: What They Mean to the Paper Mill, PULP AND PAPER, April, 1986.

13- Approach Piping and Headbox Operation as Related to Product Uniformities, "Presented at the Practical Papermaking Seminar, Co-sponsered by PAPYRUS INC. and SOUTHERN PULP AND PAPER" Atlanta, Georgia, February 18 to 21, 1986.

14- Optimizing the headbox Process Operating Variables for Coated Base Stock Requirements, Presented at OHIO TAPPI, November 21,1985, Chillicothe, Ohio

15- Retention: A Review of the Fundamental Aspects, PIMA, September, 1985.

16- Computer Performs Onsite Cleaner System Mass Flow Balance Analysis, PULP AND PAPER, June 1985.

17- Optimizing the Headbox with a Portable Computer: Part 2, PIMA, June 1985 and SOUTHERN PULP AND PAPER, July 1985.

18- Computer-Based Optimal Adjustment of Headbox/Slice Flow Dynamics; Presented at Automation 85 Conference, the Georgia World Congress Center, Atlanta, Georgia, May 21, 1985,

19- Reducing product Variabilities Through Sound Papermaking Concepts; presented at TAPPI Control Conference, April 03, 1985.

20- Computer Analysis of Headbox/Slice Flow Dynamics, PIMA MAGAZINE, February 1985, SOUTHERN PULP AND PAPER, April 1985 and PULP AND PAPER CANADA, June 1985.

21- Opportunities to Improve Quality and Increase Productivity with No or Minimum Capital Investment; Presented at the Fall Meeting, 1984 of PIMA Pacific Coast Division.

22- Approach Piping: Understanding Basis Weight Variations; PIMA,October, 1984.

23- Practical Aspects of the compressive Forces of Paper, SOUTHERN PULP & PAPER, October 1984.

24- Getting an Angle on Sheet Formation; PIMA, May 1984.

25- Some Economic and Quality Significance of Paper Basis Weight and Moisture Cross Machine Uniformity; Presented at Miami University Conference "PAPER QUALITY - KEY TO SUCCESS"; May 1984, Oxford, Ohio.

26- Paper Quality - New Trends and Specifications; Presented at Miami University Conference "PAPER QUALITY - KEY TO SUCCESS"; May 1984, Oxford, Ohio (Published in Book Form).

27- Increasing Productivity Via Operating Changes; Presented at the 28th Annual Pulp and Paper Conference; Sponsored by PIMA /WMU / TAPPI; Kalamazoo Valley Section - Michigan, March 22, 1984

28- How to Obtain Maximum Benefits in Cross Machine Control withNo Capital Investment; PAPER TRADE JOURNAL; March 15, 1984.

29- Formation and Basis Weight Uniformity Through Headbox Control;TAPPI, Vol. 64, No 11, November 1981.

30- Headbox Variables and Control; PIMA, September 1981.

31- Understanding Headbox Operation - An Opportunity for the Papermaker and Computer Control; Presented at 1981 Miami University Symposium, Oxford, Ohio, U.S.A.

32- Understanding Rewetting Phenomenon in the pressing Operation;PULP AND PAPER CANADA, Vol. 82, No. 2, February 1981.

33- Computer Control for Multiply Forming; Presented at 1981 C.P.P.A Technical Section.

34- Sizing With Low Alum Rosin Ratio, INDIAN PULP AND PAPER MAGAZINE (17): 391 (1962).

35- Presented more than 650 technical reports for problem solving solutions to more than 550 companies around the world.

Click here to view Professional Experiance Click here to view Patents Awarded